I have used lots of ICE products. I would be sure to seal connectors
with cold shrink tape, plasti-dip or liquid electrical tape. Wired
connections should be treated with some liquid protective coating too.
I also recommend wiring the internal resistor with a 12v power source in
order to heat the unit and drive off water. Lately, I have been sealing
all the screws and corners of the box material with liquid or silicone
sealant. Good luck.|
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
TowerTalk mailing list