[Top] [All Lists]

[TowerTalk] DX-Engineering Remote Coax Switch

Subject: [TowerTalk] DX-Engineering Remote Coax Switch
From: David J Rodman MD <>
Date: Tue, 23 Nov 2004 06:51:32 -0500
List-post: <>
I have used lots of ICE products. I would be sure to seal connectors with cold shrink tape, plasti-dip or liquid electrical tape. Wired connections should be treated with some liquid protective coating too. I also recommend wiring the internal resistor with a 12v power source in order to heat the unit and drive off water. Lately, I have been sealing all the screws and corners of the box material with liquid or silicone sealant. Good luck.

See: for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>