Jim Lux wrote:
At 04:31 PM 11/29/2004 -0600, Bill Aycock wrote:
Barry- I think the Cap is really a phase control in the reversing
circuit, not a starting Cap.. The value may be more critical than for
starting. Check the manual.
At 06:49 PM 11/29/2004 +0000, Barry wrote:
Tnx for all the responses about my stuck rotor. Of course, today, it
is working just fine! However, I thought I'd replace the motor
starting cap anyway, as it is 14 years old.
The original cap is rated 130-156 mfd. Is the value critical? I
have a motor starting cap here that's 88-108 mfd. Is that close
Barry Kutner, W2UP Internet: firstname.lastname@example.org
Newtown, PA Frankford Radio Club
Many TailTwister users mount the capacitor at the rotor end. Electrical
supply houses carry the caps, mounting bracket and weatherproof cover.
This frees up two wires in the control cable which may be paralled with
other wires to increase voltage to motor or brake.
BTW the motor is a 2 phase unit and the capacitor is switched from one
phase to the other to provide phase shift for CW or CCW rotation.
Remember the USS Liberty (AGTR-5)
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
TowerTalk mailing list