Another problem that can cause interment brake function is low voltage on
terminals 1 & 2 at the rotor. This is sometimes due to voltage drop on a
long cable run to the tower or a deteriorating connection. If the voltage is
marginal weather conditions could cause the voltage to drop below that
needed to cycle the brake wedge.
----- Original Message -----
From: "Paul Playford" <firstname.lastname@example.org>
To: <email@example.com>; <firstname.lastname@example.org>
Sent: Monday, November 29, 2004 3:46 PM
Subject: RE: [TowerTalk] Why did my Tailtwister stop turning?
> My experience indicates you have a sticking brake wedge.
> My Ham M had a V shaped wedge and the brake never stuck. Several years
> I rebuilt the rotator and for some reason replaced the wedge with the
> current product, which has a square face. And the wedge would sometimes
> stick. I went back to the old V shape and no more problems with that
> (still in use after 40 years).
> My T2X would quit turning. I brought the rotor into the shop and
> was fine. After several up and downs I noticed the brake was not sticking
> anymore and thought I had finally fixed it. The next time I had antenna
> work to do and went to remove the rotator I observed that the mast,
> and rotator were supported by the thrust bearing - the rotator mounting
> plate was a good 2" above it's resting point in the tower (the LM-470
> floates in the tower). When I reinstalled the rotator I made sure it was
> carrying the weight of the mast and antennas and the sticking brake
> returned. So it's back to everything hanging on the thrust bearing now.
> Every once in awhile the brake does stick again but I have found that by
> running my tower down a bit and then back up the brake releases and I'm
> in business.
> Next time I re-lub the rotator I will grind down the brake wedge a bit to
> give it more clearance. I assume the clearance between the brake wedge
> surfaces and the teeth in the housing is very close to prevent antenna
> movement in the wind and the subsequent grinding of housing teeth but I
> take that chance.
> The Ham M has turned many different antennas - the heaviest load was a
> 204BA, 153BA and 103BA stack. The T2X turns long boom 4 element
> on 20, 15 & 10.
> FWIW, the capacator in the control box will age and require replacement.
> The symptoms of a defective capacitor is the rotor just slows way down
> turning, eventually the rotator will not turn at all. I find that MFJ is
> very reasonable on priceing for replacement parts.
> de Paul, W8AEF
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org] On Behalf Of Barry
> Sent: Monday, November 29, 2004 1:35 PM
> To: email@example.com
> Subject: [TowerTalk] Why did my Tailtwister stop turning?
> Had a problem over the weekend with my T2X. It wouldn't turn. It was
> working fine, then all of a sudden it was stuck at about 300 degrees. I
> tried the usual rocking back and forth to free the sticky brake, but no
> luck. All the indicator lights were normal. I tried several times over
> next 30-45 minutes and it just wouldn't move.
> I gave up the contest in disgust, and the next day checked the rotor and
> worked fine, as if there was no problem earlier.
> The rotor was refurbished about a year ago and looked brand new inside and
> I don't think it was a thermal cut-out as I was not turning it a lot.
> Would an aging motor starting capacitor act intermittently like this?
> The control box is about 14 years old. Any other ideas?
> Barry W2UP--
> Barry Kutner, W2UP Internet: firstname.lastname@example.org
> Newtown, PA Frankford Radio Club
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.799 / Virus Database: 543 - Release Date: 11/19/2004
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list