|Subject:||[TowerTalk] Wilson Crankup Info Needed|
|From:||George Liepins <firstname.lastname@example.org>|
|Date:||Wed, 01 Dec 2004 20:59:00 -0500|
The cable on my TT-45 Wilson Crank-up tower rusted through and broke
inside the 4" outer tube. Installation instructions don't cover details
like how is the cable attached to the bottom of the inner 3.5" section.|
To replace the cable, due to real estate constrictions, I have to use a crane to lift out the inner tube to remove the remaining cable, attach the new cable and reinsert the tube back inside the tower. In order to make preparations before the crane gets here, I need to know in what fashion is the cable attached to the bottom of the inner tube, and possibly some other important details before I have the tube pulled out.
I sure would be grateful if someone in the know could provide this info.
73, George, KE4HW
My email is email@example.com, or via the list is fine.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Source for 300' of RG-11 ?, Tom Rauch|
|Next by Date:||Re: [TowerTalk] Wilson Crankup Info Needed, FireBrick|
|Previous by Thread:||RE: [BULK] - RE: [BULK] - [TowerTalk] Source for 300' of RG-11 ?, Steve Katz|
|Next by Thread:||Re: [TowerTalk] Wilson Crankup Info Needed, FireBrick|
|Indexes:||[Date] [Thread] [Top] [All Lists]|