|To:||"Carrington, Walter" <Walter.Carrington@umassmed.edu>,<email@example.com>|
|Subject:||Re: [TowerTalk] Mounting rotor on 25ag2 top section?|
|From:||Pete Smith <firstname.lastname@example.org>|
|Date:||Fri, 03 Dec 2004 17:46:33 -0500|
9 years so far with this top section, no lube, no bushing, no problems.|
73, Pete N4ZR
At 05:16 PM 12/3/2004, Carrington, Walter wrote:
I have a Rohn 25ag2 top section (used); this is the tapered top section that has a single vertical tube at the top. It appears that the way the rotor and mast were mounted was rotor on a plate inside the tower a couple feet down from the top, and the mast running through the inside of the tower section's vertical tube. Is this a reasonable way to do it? Should there be a bushing inside the tube (there is none now)? Won't friction be pretty high? Do I grease the mast? Will it ice up badly? (I live on a very windy, cold, icy hill)?
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] Stacking, Michael Harris|
|Next by Date:||RE: [TowerTalk] elevated short vertical dipole orquarterwave monopole?, Jim Lux|
|Previous by Thread:||RE: [TowerTalk] Mounting rotor on 25ag2 top section?, Chuck Dietz|
|Next by Thread:||[TowerTalk] Stacking, Michael Harris|
|Indexes:||[Date] [Thread] [Top] [All Lists]|