|Subject:||RE: [TowerTalk] radials for shunt fed tower|
|From:||"Rick Bullon" <firstname.lastname@example.org>|
|Date:||Sun, 05 Dec 2004 21:32:12 +0000|
----Original Message Follows----|
To: <email@example.com>, <Jamesnf@aol.com>, <firstname.lastname@example.org>,<email@example.com>
CC: Les Kalmus <firstname.lastname@example.org>
Subject: RE: [TowerTalk] radials for shunt fed tower
Date: Sun, 05 Dec 2004 17:57:09 +0000
Thanks for the Heads Up. Found it at:http://www.ncjweb.com/k3lcmaxgainradials.pdf
The question I have about this is how do I tell if my ground is excellent good or poor??
If I just assume that I have poor ground conductivy here and use the max length for 160 that is about 16000 ft of wire.
In another thread on here I believe the price of a 500ft spool of wire at the big box stores was about $14 a spool that would make the radial system cost about $450 dollars!!! and then there is all the time and work of putting down 100+ radials
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] T-match vs Gamma-Match Trade-off, Tom Rauch|
|Next by Date:||[TowerTalk] 50 ft self supporting tower, Larry Eckstein|
|Previous by Thread:||Re: [TowerTalk] Re: radials for shunt fed tower, Jim Lux|
|Next by Thread:||Re: [TowerTalk] radials for shunt fed tower, Jim Lux|
|Indexes:||[Date] [Thread] [Top] [All Lists]|