[Top] [All Lists]

[TowerTalk] Jenning Capactior question

To: <>
Subject: [TowerTalk] Jenning Capactior question
From: "Javier" <>
Date: Thu, 9 Dec 2004 17:15:26 -0400
List-post: <>

I just finished the box were the Vaccum Jennings capacitor will be mounted to 
feed my tower and I took my MFJ SWR Analizer and try to check the Capacitance.

What I found is that instead I rotate the shaft there is no change at the 
capacitance. Is this normal, maybe because it´s the cap by itself?

Also if I rotate too much the blue cap that it´s in fron of the capacitor get 
loosed and the shaft could take it out.

I have taken some photos of the installation for further advice.

Your advice will be kindly appreciatted, 

73´s de Javier

See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>