|Subject:||[TowerTalk] Emoto 1300SMAX Rotor|
|From:||"Brad Pioveson W9FX" <firstname.lastname@example.org>|
|Date:||Tue, 14 Dec 2004 19:49:02 -0600|
Greetings, fellow TowerTalkians. I have an Emoto 1300SMAX rotor and
controller on my bench for repairs for unknown maladies ('it doesn't work').
Info on this rotor is a bit sparse - I have what purports to be a photocopy
of a manual, but, that sadly lacks much needed info.|
Anybody have any doc's on these critters? Anybody know of a parts distributor? Or, does anybody simply have any experience with these they'd be willing to share? So far, I know that the grease in this monster is the consistency of 5 minute epoxy after 10 minutes of UV exposure and that there's a motor run cap buried in the motor housing that is shot. The AC motor, which wants to see about 100VAC, couldn't begin to turn the gears...there's simply not enough torque to break the grease adhesion!
Thanks for any help y'all can offer.
Brad Pioveson, W9FX
FX Rotor Works
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] RE: TowerTalk Digest, Vol 24, Issue 40, Roland Guidry|
|Next by Date:||Re: [TowerTalk] Emoto 1300SMAX Rotor, Masa Miura, AJ3M|
|Previous by Thread:||[TowerTalk] RE: TowerTalk Digest, Vol 24, Issue 40, Roland Guidry|
|Next by Thread:||Re: [TowerTalk] Emoto 1300SMAX Rotor, Masa Miura, AJ3M|
|Indexes:||[Date] [Thread] [Top] [All Lists]|