Pete they make an adaptor from 7/16" to N. RF Connectors has some used ones
that I think are 7/16" to N Male. Would that help?
Julio, W4HY
----- Original Message -----
From: "Pete Smith" <n4zr@contesting.com>
To: <towertalk@contesting.com>
Sent: Monday, December 20, 2004 5:27 PM
Subject: [TowerTalk] 7/16 DIN connectors
> Has anyone had any experience using 7/16 DIN connectors on 1/2 inch Andrew
> hardline (LD4-50A). How about on RG-213 size coax? I am trying to figure
> out a relatively inexpensive way of mating the Andrew to RG-213 jumpers at
> each end.
>
> 73, Pete N4ZR
> The World HF Contest Station Database
> was updated 13 December 2004
> 2843 contest stations at
> www.pvrc.org/WCSD/WCSDsearch.htm
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|