Pull the needle off the dial and turn it to show where the antenna is really
David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: email@example.com [mailto:towertalk-
> firstname.lastname@example.org] On Behalf Of email@example.com
> Sent: Thursday, December 23, 2004 21:47
> To: firstname.lastname@example.org
> Subject: [TowerTalk] Yaesu G1000DXA Problem
> I've got a Yaesu G1000DXA rotor that's been up on my 55 tower turning a
> F12 C31XR for about 3 years. I had a lightning strike about 2 years ago
> that destroyed my control box but didn't seem to affect the rotor. But
> recently I have developed an annoying problem.
> The direction indicator on the control box will not sync up with the
> rotor. The rotor still points south at the far CCW stop and points west
> at the far CW stop. But for some reason the control box seems ot be 20 to
> 30 degrees out of sync and it can not be adjusted to account for this
> Has anyone ran into this before or can someone offer advice on how to
> resolve it?
> Thanks & 73s,
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list