W7RM (SK) had antennas fixed to JA on the side of his bluff. It has to do
with QRM in the heat of the battle. It would be interesting to compare
Rush's CQWW and ARRL DX logs with anyone in recent contests.
If I had your dream location I would do both....install antennas on the
side to knock down the W/VE QRM while running EU on one rig. Who cares
about 1-2 dB one way or the other. Optimize other antennas on top of the
hill for contacting the rest of the world.
> I have spent the majority of the past week playing with HFTA. I found the
> process of acquiring my USGS data from the web and preparing it with
> MicroDEM to be quite challenging..... UNTIL I READ THE HFTA INSTRUCTIONS,
> which point it became a piece of cake! (Just because one works with
> computers doesn't mean every single application is intuitive....<gulp> By
> following the directions in the Help file to the letter, it worked
> right away - except the URL for TIGER data didn't work, but I didn't care
> about that anyway.)
> I second what Guy advises - if you don't have the ARRL Antenna Book and
> HFTA, and you use or plan to use a dipole or beam antenna, you need to get
> it! The software is quite amazing, and yes, it shows that antenna
> performance does indeed change (slightly but noticeably) when you move a
> tower back 50' or 100' from a ledge, etc. I have found it very helpful,
> have heard great things about it from others, so I will be relying heavily
> on it while planning and building my new station.
> In my particular situation, however, I was wanting the software to do
> something it cannot do. It is unable to take into account the terrain that
> is BEHIND the beam. I wanted to find out whether I would do better to
> by placing a beam as much as 70' below the top of a northeast facing
> rather than placing it at the top of the slope. The "TA" software (which
> not available) can apparently model this, but HFTA cannot. (You can't put
> elevations that are "negative" distances from the tower into your
> I don't mind moving the tower down 70' if it will improve things,
> I am at 600', and the NE property line is down at 450', still only half
> down a 300' dropoff.
> I spoke at length with N6BV about this, and he advised me to put the
> on the high point of the property. (A plus is that I will only need half
> many towers that way, because I won't need separate west towers. But then
> again, I will have only half as many towers! =)
> Dean said that placing the antenna down the slope would improve apparent
> by knocking down the signals off the back, but would not improve absolute
> forward gain. I will definitely buy that.
> My next question is: will moving the antenna down the slope also increase
> the level of super-high angle (approaching 90 degrees) stuff, which is
> likely to be atmospheric than radio signals, except perhaps on certain
> in the middle of the day when you wouldn't likely be on them anyway, other
> than perhaps the Sunday doldrums period of my favorite November
> I don't have the answer to that question, so I conceived of very
> experiment to perform this spring. It uses five identical and parallel
> dipoles (40M or 20M, any suggestions?), all installed at the same height
> above ground, each 200' apart, one in the middle of a large flat area, one
> each on the precipice (ledge) of an eastern and a western slope, and one
> each about 70' below the top of each slope on the slope-face. I will
> what happens to low angle and high angle received and transmitted signals
> different times of day and year. The big questions will be: how much do I
> reduce the signals off the back when I move down the slope, do I introduce
> more noise, and do I see any difference in signal strength at all when
> switching between the flat-area dipole, and the ledge-top and slope-face
> dipoles on the favored side, and if so, for what angle signals. (Any
> difference should be more pronounced on low angle stuff, I would think.)
> I will report back in the late spring with results, assuming I am
> at obtaining town permits and I go ahead and buy this property. I will
> a space 1,000' by 1,000' for antenna experimentation, including a large
> area and nice slopes down to the east, west and north. The south slope
> is 900 feet away, at the bottom of the neighbor's property. Always wanted
> have my own hilltop. For now, I'm going to have to share one. :-)
> be enough to keep me busy for a while at any rate...
> Cheers and Happy New Year all,
>>From: "Guy Olinger, K2AV" <firstname.lastname@example.org>
>>To: "John WA2GO" <email@example.com>,<firstname.lastname@example.org>
>>Subject: Re: [TowerTalk] Which better: TOP of hill or SIDE of hill?
>>Date: Tue, 28 Dec 2004 23:44:08 -0500
>>This will not be a question with a simple answer.
>>You need to obtain a terrain analysis program, such as HFTA, which comes
>>with the ARRL Antenna Book.
>>Both optimum placement of the antenna relative to the slope, and optimum
>>tower height can be COUNTER-INTUITIVE, and are remarkably variable
>>depending on the specifics of the foreground terrain.
>>With the program in hand, you can try various placements and heights and
>>see the results. I believe that HFTA can use USGS terrain files and give
>>you very specific data for your situation.
>>HFTA will take your entire situation into consideration.
>>I would not under any circumstances commit yourself to any configuration
>>until you have done a very careful HFTA analysis of your situation.
>>----- Original Message ----- From: "John WA2GO" <email@example.com>
>>Sent: Monday, December 27, 2004 10:02 AM
>>Subject: [TowerTalk] Which better: TOP of hill or SIDE of hill?
>>>My new qth-to-be has a north-south ridgeline running through the center
>>>I can put towers right on the ridgeline at 600' ASL, or I can put towers
>>>down the sides of each hill. In the latter case, I would have an
>>>Europe/Africa/S. America at 550' with 50' of hill rising behind it, and
>>>US/Asia/Oceania/S. America tower at 530' on the West side, with 70' of
>>>hill rising behind it.
>>>(This setup also puts the East and West towers 700' apart!)
>>>Question is: Which is best?
>>> a) being on the hilltop,
>>> b) being on the precipice of the drop-off, or
>>> c) being partway down a 250' slope, with 50' - 70' of hill sloping up
>>>behind the tower.
>>>(Yes, it slopes down 250' to both East and West, as well as North!!)
>>>I would experiment with dipoles, but I can't really experiment now,
>>>because I don't own the property yet. Also, I imagine the answer might
>>>different for 40M vs. 10M. I can have a single tower for each band if
>>>I am in the permitting process, and I want to apply for what I really
>>>in order to maximize my chances for approval.
>>>Is there modeling software I can use that takes into account the terrain
>>>BEHIND the beam? If so, which one? Anybody out there already done this
>>>modeling, or better yet, already done real-world experimentation?
>>>Intuition says having slope up behind beam is good, but that's only
>>>intuition. Wondering if it is, how much slope is needed in order to be
>>>worthwhile, on each band.
>>>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>>>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
>>>any questions and ask for Sherman, W2FLA.
>>>TowerTalk mailing list
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
Peter & Judy Grillo
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list