IMHO Although I have the TH-6 I would suggest using
the coax type current balun. I tried running legal
limit through the stock BN-86 balun and fried it.
Never had a problem since I made the coax balun
mentioned in the Hygain construction manual.
--- doc <email@example.com> wrote:
> I read the archive re. a 2002 discussion of balun
> for the Hy-Gain TH7DX, and similar beams.
> I have just acquired a very used TH7DX needing some
> aluminum repair and thought I'd revisit the balun
> question while it is on the ground and under
> I understood from the discussion that some sort of
> current balun is preferred to the BN-86 voltage
> Operating Parameters:
> 1. I will be running full legal as needed.
> 2. Installed in West Central Florida so it won't see
> ice but
> will see some heavy gusting winds (55-60MPH just the
> day!), not to mention the occasional hurricane.
> 3. It will be mounted on a tiltover, so it will be
> and strapped down when heavy weather is forecast.
> 4. It will see lots of lightning.
> Does any of that impact the choice of balun design?
> Thanks! & 73, doc kd4e
> A blessed and joy-filled New Year to all!
> West Central Florida 100% Linux. Suse 9.2
> Hallicrafters, Heathkit, Homebrew, TenTec, Yaesu
> Radio Life: http://www.gospelcom.net/twr/
> Linux-Incompatible hardware is defective!
> See: http://www.mscomputer.com for "Self Supporting
> Towers", "Wireless Weather Stations", and lot's
> more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list