|To:||"Towertalk Reflector" <email@example.com>|
|Subject:||Re: [TowerTalk] Resonant freqs for KT-34XA?|
|From:||"David Hachadorian" <K6LL@adelphia.net>|
|Date:||Sun, 2 Jan 2005 19:09:24 -0700|
----- Original Message ----- From: "Robert Katz" <firstname.lastname@example.org>
Sent: Sunday, January 02, 2005 10:38 AM
Subject: [TowerTalk] Resonant freqs for KT-34XA?
Any other ideas?
To rule out bad connections, you can connect a DC ohmmeter between the 10 meter and 15 meter capacitor shells. You should see less than 0.5 ohm (after subtracting ohmmeter lead resistance). This one measurement checks all of the troublesome connections for each element half.
You can also measure the resistance across the two halves of the rear driven element. This measurement checks all the connections through the phasing straps, matching section and balun (which shows a DC short). Here again you should see less than 0.5 ohm.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Resonant freqs for KT-34XA?, Michael Tope|
|Next by Date:||Re: [TowerTalk] coax help, Joe Giacobello|
|Previous by Thread:||Re: [TowerTalk] Resonant freqs for KT-34XA?, Michael Tope|
|Next by Thread:||[TowerTalk] Re: Oddity in digging, stormin|
|Indexes:||[Date] [Thread] [Top] [All Lists]|