|Subject:||Re: [TowerTalk] Next step in installing tower: underground power|
|Date:||Mon, 10 Jan 2005 12:46:33 -0500|
John WA2GO wrote:
Hi Chris,The standard depth for Duke Power is 30 inches. Yours may vary. If I could have gotten a machine in here to dig, the rent for a trencher that will cut 30 inches deep is $175 per 24 hours. The power company will dig it for $350, but wants to use a trackhoe. A grading company may have done it for less than $350, but I started after finding no better solution than manual digging. The challenge seems to be getting a machine in here.
My concern is that something may fall from the tower and slide down the roof into the power lines that connect to the house. My tower will be on the side adjacent to where the power lines connect. I doubt that the tower would fall into the lines, because the house is in the way. That won't keep a dipole or guy from falling during construction or installation.
It took no more than an hour to dig the tower base by hand.
In theory, theory and practice are the same. In practice, they are different.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||RE: [TowerTalk] firstname.lastname@example.org, Keith Dutson|
|Next by Date:||[TowerTalk] Source for RG6 Coax, Michael Tope|
|Previous by Thread:||Re: [TowerTalk] Next step in installing tower: underground power, Jim Lux|
|Next by Thread:||[TowerTalk] US tower and Ham IV - my experience, kr2q|
|Indexes:||[Date] [Thread] [Top] [All Lists]|