You might try bathtub caulk to seal the penetrations. However, if
you've accumulated that much water in the box, I would recommend you include
provisions to drain it. A couple of small (quarter-inch) holes in the
bottom of the box should do it. You can find screening material to apply
across the opening; the material will keep critters from establishing a home
inside the box.
Gene Smar AD3F
----- Original Message -----
From: "Keith Dutson" <firstname.lastname@example.org>
Sent: Tuesday, January 11, 2005 10:17 AM
Subject: [TowerTalk] Weatherproof Sealant
> I need to weatherproof a relay box. Under test conditions it accumulated
> inch of water in the bottom over a six month period. What is a specific
> brand of silicone sealant recommended? I understand the kind with vinegar
> smell (acetic acid) will corrode electronics components in a sealed
> environment. Also, is there a need to insert a desiccant in the box?
> The box is NEMA industrial type, made of plastic with neoprene o-ring seal
> on lid. However, there are many holes drilled for stainless hardware used
> to mount the relay and connect wires to the exterior. The relay itself is
> the open contact variety with self-cleaning contacts (hot switch 20 watts
> RF), and supposedly impervious to damp conditions.
> Thanks for any advice.
> Keith NM5G
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list