|To:||towertalk reflector <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] Tower Conundrum|
|From:||"Alan NV8A (ex. AB2OS)" <email@example.com>|
|Date:||Fri, 14 Jan 2005 12:22:53 -0500|
This gets you a page where you can select the desired height and base dimensions. This also includes the following:
"Notes: C/w anchor stub legs for concrete. Splice hardware, and an 8' x 1.9" O.D. antenna mounting pipe.
To support the mounting pipe, every Top section is factory-installed with angle frames and u-bolts at top and middle of the section.
Tower height shown is nominal. Actual tower height achieved utilizing support pipe provided with tower."
Note the last paragraph.
On 01/14/05 12:05 pm Dave NØRQ tossed the following ingredients into the ever-growing pot of cybersoup:
I won't argue with the specs or bang for the buck, but I don't understand the statement about Trylon and "8 ft. pipe". Maybe they've changed something, but my Trylon did not have any "pipe" -- just 8 8-foot sections, along with the 3 leg base (stubs) that go in the concrete. My T600-64' is 64' tall -- or at least 62', accounting for overlap where the sections join.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|