Towertalk
[Top] [All Lists]

Re: [TowerTalk] Station Ground

To: N6KJ <n6kj@yahoo.com>
Subject: Re: [TowerTalk] Station Ground
From: Joe Giacobello <k2xx@swva.net>
Reply-to: k2xx@swva.net
Date: Fri, 14 Jan 2005 17:50:06 -0500
List-post: <mailto:towertalk@contesting.com>
For heavy gauge wire, I would use a solder lug or crimp connector lug suitably sized to accept the wire.

73, Joe

N6KJ wrote:

How do people attach their rigs to a bus-bar (or
similar)? The bigger the ground wire the better, but
most rigs/amps have small, somewhat fragile grounding
posts. How do others out there connect a nice
hefty ground wire to their rig or amp? Also, how
do people attach the wires to the bus-bar or
ground rod? Bolts? U-Clamps? Solder? Any
advice would be appreciated.




__________________________________ Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. http://promotions.yahoo.com/new_mail
_______________________________________________


See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk




_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>