|Subject:||Re: [TowerTalk] Station Ground|
|From:||Jim Lux <firstname.lastname@example.org>|
|Date:||Fri, 14 Jan 2005 15:36:11 -0800|
At 01:39 PM 1/14/2005, you wrote:
How do people attach their rigs to a bus-bar (or similar)? The bigger the ground wire the better,
WHy would you necessarily want a huge wire? How much current do you expect to be carrying through that wire? Hopefully not much. Sure, bigger is (slightly) lower inductance, but presumably, the wire is fairly short. Also, is the rig chassis ground common with the power supply return (if 12V powered)? What about the electrical safety ground (the greenwire ground)?
Think about why you're grounding the rig chassis in the first place. Draw a grounding diagram of all your equipment and make sure you've got a reasonable grounding tree. A lot of the "traditions" in grounding come from days before 3 prong plugs, for instance.
It's awful easy to get ground loops where you don't intend them, or to get the chassis RF hot. Much better to have the RF return current flowing on the inside of the coax where it belongs, rather than through the chassis of the device.
If chassis and the 12VDC return are connected internally, you also don't want the chassis ground being lower impedance to the power supply than the intended 12VDC return wire, or your ground connection will carry more current than the power supply wire, which is NOT a good thing.
If the purpose of chassis grounding is for electrical safety, then the ground connection needs to carry enough current to make sure the breaker trips.
If the purpose of chassis grounding is to provide a path for a transient suppressor on the input, then short & low impedance is the goal.
but most rigs/amps have small, somewhat fragile grounding posts. How do others out there connect a nice hefty ground wire to their rig or amp? Also, how do people attach the wires to the bus-bar or ground rod? Bolts? U-Clamps? Solder? Any advice would be appreciated.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|