|To:||"Tom Rauch" <firstname.lastname@example.org>,"Frank Donovan" <email@example.com>, <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] Station Ground|
|From:||"K8RI on Tower Talk" <email@example.com>|
|Date:||Sat, 15 Jan 2005 15:24:28 -0500|
> There is no need whatsoever for any further grounding ofyour station> equipment, other than the green wires from yourequipment to your> AC power receptacles.
I should have added what was in an earlier post: Each piece of equipment is tied to a #2 coper cable with (1/2" braid/shield) that runs along the back of the desk. The longest ground is the one from the amp which is about 12 inches. That #2 cable also runs back through that common bulkhead near the entrance.
These are the grounds, not the neutral.
The only common point is back in the 200 Amp panel at the entrance.
Roger Halstead (K8RI, EN73 & ARRL Life Member) N833R, World's Oldest Debonair (S# CD-2) www.rogerhalstead.com
through a PolyPhaser
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|