|To:||"George" <firstname.lastname@example.org>, <TowerTalk@contesting.com>,<Antennas@mailman.qth.net>|
|Date:||Mon, 17 Jan 2005 10:46:53 -0500|
If you cannot find a replacement thrust bearing through Ham Radio sources, you might look up the name of your local industrial bearing distributor. I have found that very few thrust bearings are unique to Ham Radio, and are generally replaceable by an industrial replacement. The only differences that I've seen are the galvanizing and grease fittings. Thrust bearings are used for many industrial applications, although they may not be galvanized. An application of rust-preventative paint will provide adequate protection from the weather. Many heavy-duty industrial bearings are designed with grease (Zerk) fittings that allow (encourage..?) periodic re-lubrication.
73, Larry - W1GOR
----- Original Message ----- From: "George" <email@example.com>
Sent: Monday, January 17, 2005 8:31 AM
Subject: [Antennas] THRUST_BEARING_WANTED
I wonder if anyone has a Hi-Gain thrust bearing for a HG-52SS crank up tower. The tower is no longer made and Texas Towers can't help me.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] There's 'ground', and then there's 'ground', Jim Lux|
|Next by Date:||Re: [TowerTalk] There's 'ground', and then there's 'ground', Gary Schafer|
|Previous by Thread:||[TowerTalk] Re: TowerTalk Digest, Vol 25, Issue 87, Anthony DeBiasi|
|Next by Thread:||Re: [TowerTalk] THRUST_BEARING_WANTED, Jeff Goldman|
|Indexes:||[Date] [Thread] [Top] [All Lists]|