> Well that's interesting. You referenced several times in
> your posts "...what Amphenol recommends..." etc. - for
> example not pre-tinning the braid and now the 0.00" braid
> edge dimension. I was surprised because the old assembly
> instruction sheet from Amphenol that I've always used
> indicates that 1) there should be a "set back" between the
> face of the dielectric and the edge of the braid (not
> cut) and 2) the braid and center conductor should be
That's what I do Patrick.
I use a small shield set back because without it voltage
breakdown is reduced.
I lightly pre-tin the shield and center because it greatly
speeds soldering time and prevents broken wire strands from
As long as the shield is tinned, all you need do is lightly
scribe and break it. That will make a clean end.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list