|To:||"Towertalk Reflector" <email@example.com>|
|Subject:||Re: [TowerTalk] Ways To Tilt Over a Light Tower ?|
|From:||"David Hachadorian" <K6LL@adelphia.net>|
|Date:||Tue, 18 Jan 2005 11:45:55 -0700|
----- Original Message ----- From: <firstname.lastname@example.org>
Sent: Tuesday, January 18, 2005 10:36 AM
Subject: [TowerTalk] Ways To Tilt Over a Light Tower ?
I was thinking
That basic idea sounds good. Use two backstays, spaced apout 30 degrees apart, for sideways stability. You can cut winch tension in half by using two pulleys, one on the tower, and one on the post. The cable routing would go from an eyebolt closed eye) at the top of the post, through the tower pulley, back through the pulley on the post, mounted just below the eyebolt, and then down to the winch.
I've seen an LM-470 lowered this way. I think they used a 12' 4x4 post, just sitting on the ground. The two backstays took all the strain.
Dave Hachadorian, K6LL Yuma, AZ
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Ways To Tilt Over a Light Tower ?, Rick Karlquist|
|Next by Date:||Re: [TowerTalk] T2X Starting Capacitor, WA2BPE|
|Previous by Thread:||Re: [TowerTalk] Ways To Tilt Over a Light Tower ?, Alan Zack|
|Next by Thread:||[TowerTalk] Ways To Tilt Over a Light Tower, Kevin Adam N9IWW|
|Indexes:||[Date] [Thread] [Top] [All Lists]|