|To:||"Bill VanAlstyne, W5WVO" <firstname.lastname@example.org>,"_Mailing List Tower-Talk" <email@example.com>|
|Subject:||Re: [TowerTalk] N connectors pulling off|
|From:||Jim W7RY <firstname.lastname@example.org>|
|Date:||Tue, 18 Jan 2005 18:26:01 -0800|
Solder the braid to the retaining ring. Or use crimp on connectors.
At 10:22 PM 1/17/2005, Bill VanAlstyne, W5WVO wrote:
The thread on PL-259s has been very instructive, and appreciated. But I'm having problems with genuine Amphenol N connectors (clamp/solder type) installed on Belden 9913F7 coax. And yes, I did buy the type of N connector specified for this cable type (82-202-1006, as opposed to the 82-202 characterized for RG-8).
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Tower Conundrum, William Q Meeker|
|Next by Date:||[TowerTalk] Lifting Cable termination question, Pat Barthelow|
|Previous by Thread:||RE: [TowerTalk] N connectors pulling off, Keith Dutson|
|Next by Thread:||[TowerTalk] horizontally polarized antennas and salt water, Stephen Reichlyn|
|Indexes:||[Date] [Thread] [Top] [All Lists]|