|Subject:||[TowerTalk] Re: TowerTalk Digest, Vol 25, Issue 110|
|From:||Craig Clark <firstname.lastname@example.org>|
|Date:||Wed, 19 Jan 2005 15:06:01 -0500|
Even easier is to use truck or car inner tube. Cut it so it drapes over the top of the bearing. Secure it to the top of the mast with a hose clamp.
Another trick, although the mechanical purists might not approve, is to pump grease into the thrust bearing until it comes out of the housing.
If your bearing has a Zerx grease fitting(sp?) mine did, this is what you are supposed to do. It purges water and ensures everything is properly lubricated. I used a good quality all temp grease.
The bearing didn't fail, the tower leg did YMMV :-)
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Rotors - your thoughts please., Cqtestk4xs|
|Next by Date:||Re: [TowerTalk] Rotors - your thoughts please., W1GOR|
|Previous by Thread:||[TowerTalk] It''s WORKING!, K8RI on Tower Talk|
|Next by Thread:||Re: [TowerTalk] Re: TowerTalk Digest, Vol 25, Issue 110, Joe Giacobello|
|Indexes:||[Date] [Thread] [Top] [All Lists]|