You guys know my vote = AlfaSpid.
For the same price, worm gear drive, no brakes to break, no mechanical stops to
get jammed up against, no plastic gears to break, no pots to get dirty. Mine's
been turning my 40M beam for two years now no problem and I'll put one on my XA
this summer (before the HamIV causes trouble). Phil KB9CRY
-------------- Original message --------------
> I have a 60 foot 25G tower with a TH6DXX and a HAM III as a Rotor. I actually
> have two HAM III rotors...one for a spare...but....
> I am looking to do some tower work this spring and summer and wonder the
> collective wisdom about getting a different rotor. These rotors are 20 to 25
> years old...they have been rebuilt by Norms at least once...and I wonder if I
> should go to a different rotor.
> So, what do people like out there? T2X? Yaesu? Stay with what I got?
> I can either have mine rebuilt again or go with a T2X that is used....
> I will be getting a new beam but I am not sure what yet....could be a SteppIR
> 3-element, a C4, or an OPTI-Beam.
> So, what do you all think based on your experience....
> Lee - K0WA
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
> and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list