Here's the situation. I have a tower that is 130 feet from entrance to my
shack and it is connected with a 3 inch plastic pipe. I am running 2 LMR-600
coax, rotor control, and 2 antenna switches on the tower. Should I run a #4
bare copper ground wire inside the pipe from the tower to the SPG at the
entrance to the shack; run the copper wire along side of the pipe or just
ignore the #4 connecting the two together?
Further, the tower legs are grounded with 3 inch copper strap at about 25-30
degree angle from the tower to 8 feet copper ground rods about 8 inches
below grade and the rods are connected with 3 inch copper strap.
Lightning is my main concern. Advice from all you wise sages please.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list