|To:||email@example.com, "R. Kevin Stover" <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] Grounding, portable generators, field day|
|From:||Jim Lux <email@example.com>|
|Date:||Fri, 21 Jan 2005 12:07:53 -0800|
At 08:00 AM 1/21/2005, Gary Schafer wrote:
Why do you install a ground rod at the generator? Do you also install ground rods at each operating position?
This is one of those electrical code things.. better to have a definite ground, the properties of which you are certain, than a varying and casual ground. It's very hard to "just let the ac float"... at some point, you're going to have something metal touching ground (like the generator frame?). Most likely you'll have multiple places with "poor grounds" (wet feet touching the ground, for instance). Even without an actual internal fault, the capacitance across the power transformer will float the case (or the audio grounds, or the coax ground, or...) towards the line voltage. Yes, it's high impedance, but can cause all sorts of trouble.
It's perfectly ok to have a full floating AC system (and even permitted by code), but VERY hard to actually implement.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||RE: [TowerTalk] "Wire"less antenna connection, Jim Lux|
|Next by Date:||Re: [TowerTalk] "Wire"less antenna connection, doc|
|Previous by Thread:||Re: [TowerTalk] Grounding, portable generators, field day, Jim Brown|
|Next by Thread:||Re: [TowerTalk] Grounding, portable generators, field day, Dino Darling|
|Indexes:||[Date] [Thread] [Top] [All Lists]|