On my HF2V (very similar to the HF6V) the gap is only 5/8 inch. Its
not at all critical so don't worry about getting it exactly like the
original. If you're going err make the gap a little larger and you'll
have no problems if you run high power.
[mailto:email@example.com] On Behalf Of joe sloss
Sent: Saturday, January 22, 2005 0:50 AM
Subject: [TowerTalk] Buitternut HF6V
Would appeciate knowing the dimension, in inches, of the space between
the aluminum mounting post (Part "A) and the antenna Base Section
(Part "B"). This space has an insulator rod and is spanned by Base
Matching Coil Q. I am replacing the insulator rod and need to know
how far apart the two pieces of aluminum tubing are.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list