|Subject:||[TowerTalk] Force 12 Antenna Disassembly|
|From:||"Pat Barthelow" <firstname.lastname@example.org>|
|Date:||Sun, 23 Jan 2005 20:23:45 -0800|
I recently dismantled a C31XR and found it easy. It really helps to have a drill press acessory to a hand drill, (or a real drill press) and a vee shaped cradle for the tubing, to accurately drill out the rivets. I used an 1/8" bit...Goes quick that way, and you make precsion holes.
73, DX, de Pat Barthelow AA6EG (831) 646-0388 email@example.com
From: <Berggrent@aol.com> To: <firstname.lastname@example.org> Sent: Sunday, January 23, 2005 9:04 PM Subject: [TowerTalk] Force 12 Antenna Disassembly
I am going to take a Force 12 antenna apart. To remove the rivets, do I just
use an 1/8 inch drill bit or should I start with a smaller bit first? What helpful hints have you so that I don't screw up the aluminum holes or make
it difficult for the next guy to put things together? Many thanks. 73 Tommy
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Force 12 Antenna Disassembly, Ed Laughery|
|Next by Date:||Re: [TowerTalk] Force 12 Antenna Disassembly, KJ6Y|
|Previous by Thread:||Re: [TowerTalk] Force 12 Antenna Disassembly, Ed Laughery|
|Next by Thread:||Re: [TowerTalk] Force 12 Antenna Disassembly, KJ6Y|
|Indexes:||[Date] [Thread] [Top] [All Lists]|