|Subject:||Re: [TowerTalk] MFJ-1025/1026|
|From:||Roger D Johnson <firstname.lastname@example.org>|
|Date:||Mon, 24 Jan 2005 09:43:51 -0500|
Tod - MN wrote:|
4.To protect the Aux Antenna input, it employs a internal, soldered in, 12v dial lamp as a "fuse". If you are the careless kind you may want to modify this to avoid having to remove the unit from the case, unsolder the lamp and resolder in a new one if that terminal gets large input voltage from xmtr. Time consuming if you are contesting or just DXing and the unit is the only reason you are hearng the DX.
On my FT-1000D, I broke the coax between TR circuitry and the receiver
and brought the ends out to a pair of RCA jacks on the back panel. I ran RG-58 from the jack connected to the TR circuitry to an external antenna switch for Beverages, etc. The pole of the switch goes to my preamp, through my MFJ-1025 and back to the RX input of the FT-1000. No worries about transmitting into the 1025 and easy to hook up external antennas.
-- Remember the USS Liberty (AGTR-5) http://ussliberty.org/ _______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|