|Subject:||Re: [TowerTalk] PL-259 Soldering temperature|
|Date:||Mon, 24 Jan 2005 22:03:26 -0600|
Any experience or advise on using a propane heated soldering tip for soldering the PL-259? I'm referring to the rather heavy tips, 1/4 or 3/8" diameter. They can be custom made for extra mass and to mate the job. They tend to get too hot and burn the flux if the propane is turned on full. Should they be filed to fit the curve of the connector or to fit into the hole?
73 de WOØW
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||RE: [TowerTalk] RE: TowerTalk Digest, Vol 25, Issue 139, Keith Dutson|
|Next by Date:||Re: [TowerTalk] RE: TowerTalk Digest, Vol 25, Issue 139, Gary Schafer|
|Previous by Thread:||[TowerTalk] PL-259 Soldering temperature, wb4mle|
|Next by Thread:||RE: [TowerTalk] PL-259 Soldering temperature, Keith Dutson|
|Indexes:||[Date] [Thread] [Top] [All Lists]|