The new Qth that I just bought has soil which differs from the dense
common clay usually found in the soil here in NorthWestern Louisiana.
This soil has a noticeable percentage of sand mixed in with the soil
producing a somewhat more porous soil. There is a pit not far from the
house where this soil was carved out because I was told it makes
excellent foundation soil under slab houses, etc.
I have checked in the documentation for the crank up towers that I
and I don't see any information on the soil composition factoring into
the tower base dimensions. The base is spec'd to be 3 x 3 x 7. Does
soil composition enter into this picture at all? The tower is a 70'
unguyed crank up.
The hole will be underdisturbed except for the hole specifically.
seems like I should make the base bigger, but I really don't have a
clue what I should do, or if I should just ignore that factor. If it
an important issue, it would seem that it would be factored in in the
standard base recommendation from tower manufacturers, but I have
seen it even in fixed tower footings such as Rohn catalog engineering
specifications. So, that tells me it is probably not important. So, I
go back and forth. If soil composition is important, how do I figure
out what to do?
I certainly don't want to weaken the wind ratings of the tower and
antenna by whatever I do.
Any help or experience on how to deal with this issue would be greatly
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list