I used a stainless steel U-bolts for my system. Check
out this link for the info and pictures.
You can bolt lugs to it or as I did, copper bars.
Simple, easy and works great!
--- MIKE GREENWAY <K4PI@peoplepc.com> wrote:
> I have read here before on the reaction of putting
> copper to galvanized
> metal causes a bad reaction. There were suggestions
> of putting stainless
> steel sheets between the galvanized leg and copper.
> Are there any fixtures
> that bolt to galvanized legs that have little
> reaction and allow the copper
> ground wire to be connected to the fixture? The
> ones I see in hardware
> stores are what appears to be brass and I have used
> them before and of
> course always using lots of No-Ox with precautions
> taken to prevent wash out
> of the No-Ox. Any other suggestions better than the
> brass or stainless
> sheets? Mike K4PI
> See: http://www.mscomputer.com for "Self Supporting
> Towers", "Wireless Weather Stations", and lot's
> more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list