|Subject:||[TowerTalk] Tower Rust Repair|
|From:||"John Crovelli" <email@example.com>|
|Date:||Thu, 27 Jan 2005 09:43:34 -0500|
I'm about to enbark upon a tower painting project on Aruba. In past years
I've used various products such as ZRC Cold Galvanizing Compound, POR15, and
Brite to name a few with varying degrees of success. The conditions on
Aruba are extreme....with constant salt and wind with sand that tends to
etch the steel, especially on the east side of towers..|
I just read the specs on a product called Rust Bullet. Apparently it chemically combines with the rust and claims to be UV resistant (unlike POR15). They recommend two coats.
Has anyone used Rust Bullet to repair tower rust....or does anyone have other product recommendations?
John W2GD (aka P40W) firstname.lastname@example.org
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] How to stiffen a mast, Barkey, Patrick M.|
|Next by Date:||[TowerTalk] Problems with IC 706 Mk II, John Waterman|
|Previous by Thread:||[TowerTalk] How to stiffen a mast, Barkey, Patrick M.|
|Next by Thread:||Re: [TowerTalk] Tower Rust Repair, W3YY|
|Indexes:||[Date] [Thread] [Top] [All Lists]|