I assume that you are speaking of a vertical parasitic array which will
cover 4 directions.
You will find a discussion of such arrays and the requirements for proper
operation in ON4UN's, Low Band DXing, Chapter 13, paragraph 3.9. Note that
the ground radial requirements are quite stringent, which may explain why
most operators opt for current forced, driven arrays.
Driven arrays are covered in chapter 11 of the same book.
INK N4OO
======================================================
At 10:29 PM 2/20/2005 -0600, Ron Feutz wrote:
> >I have everything I need for a parasitic 40 meter 4-square but can't find
> >design info.
> >
> >I want to try this antenna as my marginal cost will be zero. I have 4 33'
> >verticals, an Ameritron RSC 8-V switch and plenty of radial wire and coax
> >on hand.
> >
> >Any info on design and tuning will be appreciated. I believe the design
> >has 3 "reflectors" that use the inductive reactance of the open feedline to
> >make them "reflectors," right. How long should the feedlines be? I can
> >tune with the MFJ 259B.
> >
> >Any models out there to tell me what to expect?
> >
> >Archive and google search turned up nothing.
> >
> >73,
> >
> >Ron KK9K
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|