Towertalk
[Top] [All Lists]

Re: [TowerTalk] insulated wire as radials and antennas.

To: <jimjarvis@ieee.org>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] insulated wire as radials and antennas.
From: "Tom Rauch" <w8ji@contesting.com>
Reply-to: Tom Rauch <w8ji@contesting.com>
Date: Tue, 22 Feb 2005 14:20:31 -0500
List-post: <mailto:towertalk@contesting.com>
> To which I have to append...that's 600V @ 60Hz!  God knows
what it is
> at 7 MHz.

It's a whole lot higher than 600 volts. 600V is the listed
insulation rating, not the breakdown voltage. Fresh
insulation would hold off at least a few kV peak. The
wire-to-wire voltage, especially considering phase
difference is not likely to be 180 degrees,  must be
considerably higher than a few kV in order to burn through
two layers of insulation. Frequency doesn't matter a great
deal.

This is why a few sparse radials often are several dB down
from a large ground system.

73 Tom




_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>