Don't know about the rotator not turning but the indicator is driven by a
rubber belt and the belt may be defective.
de Paul, W8AEF
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jerry
Sent: Sunday, February 27, 2005 8:10 PM
To: Tower Talk
Subject: [TowerTalk] G-800SDX
My 800SDX had developed some problems. First the controller indicator
stopped "indicating" but the rotor would still turn. Now will not turn at
all.
I have been told there is a Troubleshooting addition to this unit's
instruction manual. If so, didn't come with my unit purchased used.
Can anyone point me in the right direction for this info? Especially the
voltages.
Tnx so much.
Jerry
K7LY
_________
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|