I have a new 15M6 from M2'd and one of the boom sections fits EXTREMEMLY
tight. I was able to insert the section about half way in and that was
it. I needed to use a come-along to extract them.
I did use Penetrox as well.
Any ideas on using emery cloth or sander to remove enough aluminum to
make the assembly easier?
FYI...These are the 2 1/2 inch sections...
Thanks...
Rich N7TR
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|