Towertalk
[Top] [All Lists]

Re: [TowerTalk] Radial Length

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Radial Length
From: Frank Latos <flatos@duosys.com>
Reply-to: flatos@duosys.com
Date: Mon, 20 Jun 2005 12:23:16 -0700
List-post: <mailto:towertalk@contesting.com>
>At 08:53 AM 6/20/2005, Don Josephs wrote:
>  
>
>> Folks  de  K5DEJ
>>
>>Is there a formula for determining the radial length, i.e. other than 468/f
>>MHz ???   I am trying to get a High Sierra 1800 Pro to resonate on my Motor
>>Home and have not been successful, as of this writing.
>>    
>>
I have essentially the same antenna.  My installation (on a full-size 
pickup truck) works well on 80, 40, and 30 meters with a
4:1 "un-un" transformer for impedance matching.  I used the "5-ratio 
un-un" design described in chapter 15 of Sevick's book
"Understanding, Building, and Using Baluns and Ununs". 

The 12.5 ohm tap (4:1) provides a good match on 80 - 30, and the 35 ohm 
tap works well on 20 - 10.

Frank AC8P



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>