[Top] [All Lists]

Re: [TowerTalk] Rohn 25 base3

Subject: Re: [TowerTalk] Rohn 25 base3
Date: Thu, 4 Aug 2005 12:38:53 EDT
List-post: <>
In a message dated 8/4/2005 9:07:24 AM Pacific Daylight Time, writes:

>  A friend wants to replace and old free standing hbx tower with a new Guyed 
60 foot Rohn 25. He wants to use the old concrete in the ground  by using a 
new Rohn base plate and drilling 4 holes into the old concrete and adding large 
long bolts and using epoxy to hold them in. Does anyone have experience with 
this approach and any positive or negative comments. thanks van

    Yep, that's the way you do it. Rent an impact drill and bit and you're 
good to go. Drilling doesn't take long at all. The rental place probably has 
industrial concrete epoxy you need too. BTW the epoxy is stronger than the 
concrete. People use this technique every day.

Steve    K7LXC
Professional tower services for commercial and amateur
Cell: 206-890-4188

See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>