[Top] [All Lists]

Re: [TowerTalk] Rohn 25 base3

Subject: Re: [TowerTalk] Rohn 25 base3
From: (Phil Camera)
Date: Thu, 04 Aug 2005 16:46:36 +0000
List-post: <>
I also concur with the info below.
Go to the following website for more info on one manufacturer of the drill and 
epoxy products that one may use.  Phil  KB9CRY

 He wants to use the old concrete in the ground by using a  new Rohn base plate 
and drilling 4 holes into the old concrete and adding large  long bolts and 
using epoxy to hold them in. Does anyone have experience with  this approach 
and any positive or negative comments. thanks van 

 Yep, that's the way you do it. Rent an impact drill and bit and you're 
 good to go. Drilling doesn't take long at all. The rental place probably has 
 industrial concrete epoxy you need too. BTW the epoxy is stronger than the 
 concrete. People use this technique every day. 

See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>