Steve - since you brought this up, I have a related question for you. When
I first read the Loos literature at their website, they made it plain that
their gauges were calibrated for the stainless lines used on boats. I
figured that the way the gauges work it was possible that a stainless line
and an EHS line of the same diameter might produce different readings when
tensioned to the same amount (the EHS is a lot stiffer, right?). So, I
asked the Loos people about that and they told me to contact YOU with the
question! Never did that, so am doing it now. Do you know if there is any
difference in the measured tension on the two types of guy lines that have
been adjusted to the same tension with the conventional type of gauge?
For those who haven't used one, the Loos gauge is definitely the way to go
and makes checking the tension periodically very easy.
----- Original Message -----
To: <email@example.com>; <firstname.lastname@example.org>
Sent: Friday, August 05, 2005 9:36 AM
Subject: Re: [TowerTalk] Why preload guy lines?
> The easiest and cheapest way to have the proper tension is to use a
> Guy Wire Tensioner. They're pretty accurate too. One for 3/16" and 1/4" -
> most common ham sizes - is available from www.championradio.com for
> Steve K7LXC
> Champion Radio Products
> TOWER TECH -
> Professional tower services for commercial and amateur
> Cell: 206-890-4188
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list