If your time is truly completely without value, and you are willing to
undergo the risks (whatever they may be) involved with use of an inaccurate
substitute, go to the "McMaster-Carr" and or Grainger websites armed with
your dimensions and I'll bet you can find a match/replacement.
Also, as I write this, I seem to recall that this specific info was
addressed on TT Reflector sometime in the last 6 mos or so....but I don't
know if there is a searchable archive . Good luck, 73.
Process: Overpay and get it from UST.....or, look, wonder, save $25,
possibly discover error in potentially horrendous way, etc.
PS: Try asking UST what pully they use and/or where they get them
....depends on who you're speaking with, you might get lucky.
----- Original Message -----
From: "KT2Q" <email@example.com>
To: "TowerTalk" <firstname.lastname@example.org>
Sent: Monday, August 08, 2005 6:19 PM
Subject: [TowerTalk] Raising fixture pulley
> Greetings all,
> Does anyone know the type of pulley used on the HDX555 tower with the
> raising fixture? U.S. Tower sells the pulley for $93 dollars and was
> wondering if there's a cheaper way to go.
> I need the pulley and the bolt/bearing that holds it in place.
> Tony KT2Q
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list