Towertalk
[Top] [All Lists]

Re: [TowerTalk] Corrosion proofing Elements/connections

To: KT2Q <dxdx@optonline.net>
Subject: Re: [TowerTalk] Corrosion proofing Elements/connections
From: John E.Cleeve <g3jvc@jcleeve.idps.co.uk>
Reply-to: g3jvc@jcleeve.idps.co.uk
Date: Sat, 10 Sep 2005 11:16:43 +0100
List-post: <mailto:towertalk@contesting.com>
Without doubt use clear "Waxoyl" manufactured in the UK by Hammerite, 
availble in the USA from motor body factors, especially those dealing 
with UK manufactured vehicles. I have used this material, the clear 
version, since around 1979, when my tower and antennas first went up. 
The application of Waxoyl is time consuming by brush, but well worth 
the effort, for the same yagi is sitting at the top of my tower, since 
1979. I also coated the entire galvanised tower, plus the yagi, not 
forgetting to mask off the antenna insulators. Joints between 
telescopic aluminium sections, opened after thirty years have been as 
clean and shiny as the day they were assembled. Waxoyl is clean to 
use, and easy to remove, just with a wipe, by a cloth dipped in white 
spirit....just enter "Waxoyl" into your search engine, and I am sure 
you will find a local source....one last point, because it is a self 
healing waxy coating, surface moisture will not adhere, and this means 
less chance of ice forming on the antenna etc, during the 
winter.....good Luck, John. G3JVC.

On Sat Sep 10  2:28 , KT2Q <dxdx@optonline.net> sent:


>All,
>
>What's the best way to protect electrical connections from corrosion? 
I have 
>new antennas going up and would like keep the balun connections 
corrosion 
>free as long as possible.
>
>Since there are two different metals involved with the driven 
element / 
>balun connection (stailess nuts, bolts and aluminum elements) is 
Penetrox 
>the best thing to use? I was thinking of Penetrox and then a liquid 
tape or 
>Scotchkote on the balun connections.
>
>I was also thinking about coating the balun housing and balun wire 
with 
>something to keep UV from taking it's toll?
>
>On the element joints -- is it best to use Noalox or Penetrox? It 
seems both 
>would keep connections corrosion free and do the same job with 
conductivity. 
>Is there a difference?
>
>Has anyone taken apart Yagi elements after 5 or 10 years and noticed 
if the 
>Noalox or Penetrox stopped corrosion from forming?
>
>Thanks,
>
>Tony KT2Q
>
>
>
>
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting 
Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 
1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>