Towertalk
[Top] [All Lists]

Re: [TowerTalk] How flexible is standard LMR-400 ??

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] How flexible is standard LMR-400 ??
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Fri, 16 Sep 2005 10:40:07 -0500
List-post: <mailto:towertalk@contesting.com>
I have found the "comfortable" bending radius is about 1.5 feet (3 foot
loop), but you could get a loop quite a bit tighter without distorting the
center conductor.  I treat it similar to 1/2 inch hardline.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Dan Bookwalter
Sent: Friday, September 16, 2005 10:30 AM
To: towertalk@contesting.com
Subject: [TowerTalk] How flexible is standard LMR-400 ??

 
 


                
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>