Thanks to everyone for all of the information on where to go for stepper motors
"geared" to the budget minded. Three of the sights suggested look real good
for motors at $12 and under. I think I saw the motors I will be buying at
AllElectronics. Need time to digest all the information.
Jim Lux wanted to know how much torque I needed and If I wanted a device that
would go to and stop at a previous software setting or a "step and direction"
setup. The answer is I do not know how much torque a vacuum Variable or an air
variable requires. I guess I will use West Virginia math and try and make a
good guess. The motor I am looking at has twice the torque of what Richard -
KJ7CU is using and he is running his at reduced power (5v versus 7.5v).
The implementation I was planning on playing with was a "step and direction"
controlled by computer. Now that Jim has planted the idea, I may look at a "go
to and stop" solution. I know there are cheaper solutions with DC motors, but
I have all ready done that and it is time to learn something new.
Thanks again......Pat, K8PC
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|