> You know... I ordered the new Handbook & Antenna Book and
need to start
> reading... It's been too long since I've played with this
stuff! You are
> right, of course, the measurement problem you stated
reminds me of my dog
> chasing his own tail!
I only wanted to point that out because everyone always
measures X=0 in the shack and **assumes** X=0 in the shack
is the same as X=0 at the antenna.
X=0 (resonance) in the shack is only X=0 at the antenna
under very specific conditions that most people ignore.
The 5% change in length from insulation might indeed be
true....but it's also very important to remember we can't
really measure antenna resonance in the shack unless we know
a lot more than what a meter is telling us.
You received good answers, I just wanted to point out the
problem with making measurements of resonance at the shack
end of a feedline that has standing waves.
73 Tom
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|