Bill,
I'm trying to picture this...so one end goes in the top and the other goes
through the bottom in a hole you make? How do you seal the each end?
73 & Thanks!
Gordon Beattie
w2ttt@arrl.net
201.314.6964
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Cqtestk4xs@aol.com
Sent: Tuesday, November 01, 2005 3:15 PM
To: TOWERTALK@contesting.com
Subject: [TowerTalk] Sealing Barrel connectors
In a message dated 11/1/05 7:52:57 PM Greenwich Standard Time,
k5uj@hotmail.com writes:
Instead of using coax seal or silicone which is
messy, i simply place such vulnerable points as mentioned inside plastic
sleeves. you can use the type newspapers are delivered in and arrange them
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I've posted this one before. I use Coke plastic bottles...16 oz size for
this one is perfect. Inset coax and seal the entrance point. The damn
things
last for years floating around oceans and even in the Florida sun, I have
yet to
have one crack.
Bill K4XS
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|