[Top] [All Lists]

Re: [TowerTalk] Tubing Cleaning

To: <>
Subject: Re: [TowerTalk] Tubing Cleaning
From: "Don Moman" <>
Reply-to: Don Moman <>
Date: Tue, 3 Jan 2006 00:20:56 -0000
List-post: <>
If the "gunk" happens to be some form of NoAlOx compound that has dried, it
can be very tenacious to remove. But a shot of WD-40 and it just wipes right

73 Don

----- Original Message -----
From: "AA6DX - Mark" <>
To: <>
Sent: Monday, January 02, 2006 23:42
Subject: [TowerTalk] Tubing Cleaning

> First off, find a solvent that will easily liquefy your problem "gunk" ..
> if you wish to burnish the inside of the tubing and make it sparkle, use
> Scotch Brite, or the likes ..   or, check your local sporting goods store
> for a good shotgun cleaning device .. As a "gunny", I have the rifle and
> pistol cleaning aids that do just dandy.
> Worky Worky!
> BUT .. recommend .. stay away from the steel wool ... creates a nasty in
> piping in short order... iron rust in aluminum Not Good ..   73 -- Mark .


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>